Doing your own plumbing repairs can have many benefits. You can save money by not having to call a plumber and pay for their labor. You can also gain a sense of accomplishment by learning new skills and completing tasks yourself.In this article you will find a few ideas that you could find to be very handy.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.
If a pipe freezes, make sure you turn the closest faucet to allow the thawing water to exit. This will relive some of the pressure, and could prevent cracks from appearing.
Don’t pay a plumber until the job is completed. A plumber may require some money upfront, but it’s wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.
Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.
Do not, under any circumstances, put lemons down your disposal. Although the lemon smell will give your disposal a great smell, its acid can corrode the metal parts in it. Instead, use products that are made specifically for this use. You can purchase these products at most hardware stores or wherever cleaning products are sold.
Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.
Keep an eye on the hoses for your dishwasher and washing machine. These hoses can leak and bulge, which can be a problem. Check them for signs of wear and tear and replace any hoses more than 10 years old. You’ll find that these hoses age well, but you have got to make sure they are doing the job they should.
Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.
Valves that are used only infrequently sometimes fuse together. Keep them lubricated using penetrating oil. Be sure to turn them periodically to avoid sticking.
While it is possible to do plumbing activities yourself, it is generally not recommended. If you are not sure of what you are doing, then you must hire a professional. This will help to insure you don’t make a bigger mess of the small problem that your plumbing previously had.
When having a consultation about a job with the plumber, take the opportunity to get to know them andtheir business better. Ask about their experience with the type of job that you are wanting to have done. Being comfortable with your contractor is important. They may be spending significant amounts of time in your house depending on the complexity of the job. You want to be convinced that they’re up to the task.
Remember that there is a lot more to plumbing than simply knowing that water runs downhill. One of the more common repairs that a plumber will make is the repair of water lines.
If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.
There is no doubt that many of the common maintenance and repair jobs that need doing on your plumbing are things that you are well capable of. You just need to adopt a cautious and methodical approach. Don’t rush anything or take chances and you’ll be fine. And, if you’re a husband, you can score major brownie points with your wife!