The cooling and heating system in your home plays a major role in your comfort. This is the job of the HVAC system, which means that it must be kept it kept operating properly over the years. If you do not properly care for it, you should expect terrible living conditions and expensive repairs. These tips will make sure you keep the HVAC system running well.
If you must hire someone to help you out with your HVAC system, be sure to learn about all of the requirements your state has legislated regarding licencing and insurance. You need to be able to ask anyone you plan to hire if they meet these requirements before you hire them.
Before you hire anyone to do any work on your HVAC, be sure to get a written estimate which has itemized costs listed on it. This will ensure that comparing one contractor to another will be simple as you can see what one offers that another doesn’t, or what price they’re charging for the same items.
Let your friends and family know about the discounts that are possible via ENERGY STAR. There’s a lot of savings that can be had here, so why hold this good news all to yourself! You can save those closest to you hundreds of dollars over the course of a year.
Clean your permanent air filters or replace disposable ones every single month. If you have the choice, an electrostatic is the best option on the market today. Be sure to turn off your unit before you change the filter as it should never be run without a filter in place.
Sometimes, it can be hard to figure out if your HVAC system needs to be fixed or needs to be replaced. If your system frequently breaks down, is always turning on or off on its own, or if your bills are too high, it may pay to have it replaced. Otherwise, little things can just be fixed.
To help keep your energy costs down, have your heating and cooling system serviced at least once a year. The contractor should oil the parts that move and check the motor and freon levels. This maintenance means that your system will operate optimally.
As you compare new HVAC system, be sure to look at the energy ratings for each unit. The higher they are, the better they will be. Efficiency will not only get your home comfortable faster, but it will save you on your energy bills when you are running your new unit.
Looking for an efficient way to cool your home? Consider installing a whole-house evaporative cooler. They use water to cool air instead of traditional chemical coolants, using a ton less energy to cool your home than those other units. That said, they do work best in dry climates and not at all in humid ones.
If you can, find a way to create shade over your outdoor HVAC unit. This can actually save you money as shaded air being pulled in by the HVAC unit is typically 5 to 6 degrees cooler than air that’s heated by direct sunlight. It’s a smart solution to lowering those energy bills.
Be sure to check your Filter Check light frequently on any stand-alone units. If it is on, turn the unit off as you can’t operate it without a filter in place. Clean the filter carefully and return it to its proper location, but don’t operate the unit if the filter is still wet.
If your HVAC unit is not operating as efficiently as it once was, check the evaporator coil in it? There may be some debris blocking it which is causing the issue. You can use a soft brush to clean it – like the one you find as an attachment for handheld vacuum cleaners.
When you hire a contractor to do a job, be sure to listen to what they tell you. For example, they can give you advice on how to keep your HVAC in working order. Ask about maintenance tips and how often you should be cleaning or servicing the unit.
Keep your evaporator coil clean. A dirty coil will cause the unit to strain when cooling air. You can clean the coil yourself easily. Simply remove the front panel to expose the coil and use a soft brush attached to a vacuum to remove any dust and debris that has accumulated on the coil.
Don’t hire a HVAC repairman unless they offer 24 Hour Emergency service. It’s crucial that they can go to your home at any time you need them.
It is important that any contractor you hire is familiar with your make and model of HVAC unit. Ask them what brands they work with most frequently and compare it to what you have. If you can’t find a contractor that knows your brand well, instead consider who has the best reputation.
While it is common practice to negotiate a rate quoted by a contractor, you should not offer an amount that the contractor will find offensive. They have to pay for things like insurance and overhead costs. Keep this in mind when you are trying to haggle with them for a better rate.
Choose a contractor who installs items from more than one manufacturer. They should be able to compare multiple brands to ensure you are getting the right unit for your needs, not just what they have on hand. This will save you time and money when you have a great system in place.
Try looking at some reviews online for local HVAC companies. There are many websites and directories online that should include these services that are in your area. This can help you comparison shop. You need to look at many aspects. Pay special attention to licensing, how many years they’ve been around, any issues, and how they were resolved.
Now you know what you have to do to keep your home HVAC system healthy. Maintain your unit on a monthly basis. Use what you’ve learned to keep your system up and running.