If you are completely new to the world of plumbing, then you are probably thinking that some tips on plumbing will help you immensely so that you can begin maintaining your own at home. Listed below are some tips to get you started with your home plumbing maintenance and repair.
To prevent your frozen pipes from bursting, leave the nearest faucet on to give the water a way to escape. Doing so provides pressure relief, and might spare you the damage of a burst pipe.
Use a hairdryer to thaw frozen pipes, after you shut off the water to the house. A hairdryer will gently heat the pipe and thaw the ice without causing significant damage to the pipe. Shutting off the water first means that if the pipe is broken, there will be no rush of water into the house.
Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!
Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.
Ensure that if something goes wrong in your garbage disposal that you resist any and all urges you have that might make you want to put your hands inside to fix a problem. Garbage disposals always pose a possible threat, even when powered off or non-working all together. Locate a diagram of the garbage disposal, or some sort of troubleshooter, online.
Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.
Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!
There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.
There are two ways to remove stubborn clean-out plugs. First, you can hammer a chisel around the fitting base to loosen it. You can also chisel into the plug.
To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.
Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.
During the winter months, your water heater works the hardest. To keep it in optimum condition, flush it out before winter arrives. Flushing the system helps remove the sediment buildup, which causes internal corrosion of your water heater, shortens its lifespan, and reduces heating efficiency. Connect a hose to the faucet near the bottom of the tank and drain several gallons by directing the water into a nearby drain.
If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.
Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.
Teach your children how to notice plumbing problems. Many parents handle plumbing issues without sharing that information with their children, who grow up not knowing anything about plumbing. Any time you make a small repair or notice a problem, call your kids in and explain what the problem is and what you are going to do. Educate them so they can make good decisions in the future.
Many people will let plumbers shake them down for high fees, because they have no idea about plumbing themselves. If you own your own home, you should at least learn enough about plumbing to understand how plumbing problems should be handled by a professional. This will make sure that you aren’t ripped off.
As you can see from the above list of tips, maintaining and repairing your own plumbing can be very time and money-saving in the long run if you know what you are doing. After following these tips, you will no longer be new to plumbing, but you will become a plumbing expert.