If you’re new to plumbing, you may be overwhelmed or confused by everything you’re learning about it. As overpowering as this can be, the following advice is simple to follow.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
If you have a clogged drain, don’t use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode your metal pipes leading to leaks and broken pipes over time. Instead, stick to a plunger or make use of a plumbing snake to clear them.
Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.
If you have drains in your house that have not been used for a long period of time, pour one gallon of water through them to keep them functional. Furthermore, this will have the added benefit of reducing any odors from entering your house from lack of use during the year.
While it is possible to do plumbing activities yourself, it is generally not recommended. If you are not sure of what you are doing, then you must hire a professional. This will help to insure you don’t make a bigger mess of the small problem that your plumbing previously had.
If water is flooding your home, immediately switch off the main electrical power. If water comes into contact with any electrical components, it can become a fatal situation. Once the power is off, then deal with the flood water. Put your own and your family’s personal safety first, and show each member of the family how to shut off the power.
Make sure that the temperature of your home’s water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.
Protect you plumbing pipes! If you live in an area which has cold winters and are leaving your home for an extended amount of time, protect your plumbing while you are gone! Shut off the main water valve! Drain the system of water by opening the faucets at the highest and lowest points of the house. Also, make sure that you have left some heat on in the house! Set the thermostat to at least 55 degrees Fahrenheit.
Always keep a trash bin in the bathroom so that you can dispose of cotton swabs, facial pads, and hair. Do not put these materials in the toilet as they can cause clogs over time and disrupt your water flow. These items will not dissolve or break down when submerged in water.
For people who live in an apartment complex, plumbing is often forgotten about. The first time they move into a home they are unable to resolve any minor plumbing problems, because they have never dealt with this kind of thing. It is good to get a basic understanding when moving into your first house.
If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.
When you are working with plumbing, you also need to have some basic skills in other areas. This is especially true of electrical problems, as the two systems often overlap. This doesn’t mean that you need to solve the problems, but that you understand what the problems could be.
When you are deciding to work on a plumbing project yourself, first make a list of all of the tools and items that you could possibly need. After this, make sure that you have all of these things close at hand. There is nothing worse than almost finishing a project, but not having the correct screw.
Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit’s energy consumption. If you determine that the temperature is too high, adjust immediately to avoid any of these things from happening.
Having to wiggle the toilet handle or hold it down to get your toilet to fully flush indicates that the tank parts need to be replaced. Kits that include all of the parts needed can be purchased in any hardware or home improvement store to easily do the repair yourself.
As you can see, plumbing isn’t so scary when you know what to do. Follow the tips you’ve read here next time you have a problem with your plumbing, and soon your problem will be solved, all without having to call an expensive plumber to fix the problem for you.