HVAC is what a lot of people would like to learn about, but they don’t know where to get started. This is why things like this guide were put together to help people like you out. Once you’re ready to tackle the subject, all you have to do is read along.
Ask for referrals when hiring someone to install your HVAC system. Someone may seem like they know what they are doing, but you cannot simply take their word for it. You should be able to call past customers to get an idea of what to expect from this particular installer.
Although most people are thinking of their heating systems during the winter months, air conditioning is also important. When installing a new furnace or heating system, make sure the air ducts are also set up to work with your air condition system. Using the ducts for both heating and cooling is the most economical choice.
Clean the coils and blades in your condenser at the beginning of summer. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. In addition, always remove all debris such as leaves from the outside condenser unit.
An HVAC system is a really expensive investment. This is why you should do some browsing before purchasing your system. Try to find a good sale so you can get your system at a discount. Check out a couple of sites before making a decision. A great site to begin is www.energystar.gov.
In the winter, wearing layers can save you a ton of money on your utility bill. If you can install a digital thermostat that makes the house cooler when you’re asleep and warmer just before you get up, you can see significant savings on your next bill when it arrives.
If the house is yours or you’re permitted to, replace the windows that are single pane with windows that are double pane. In warmer months, these windows will help to maintain the cooler inside temperature. Conversely, they keep warm air in during the winter.
Consider all of your alternatives before installing a central air conditioner. You can only cool certain rooms, use whole-house fans, or even make use of a geothermal system. The more efficient the system you set up, the less you’ll spend on utility bills over time as you use it.
When you are looking for a service provider to perform service on your HVAC system, look for a company that stands behind their work. This is especially important if your compressor or condenser is being repaired. Repairs to these two things are extremely expensive, so you want to ensure that the service provider warranties their work.
Be careful of sounds in your HVAC. If the condenser fan begins to make a grating or clicking sound, the blades could be hitting an obstruction. If blades get bent, don’t try straightening them. You could unbalance them and cause them to hit the condenser coil. This could loosen the motor in the fan. Try replacing the bent blades with new ones. Make sure the new blades can freely rotate without wobbling.
Never hire anyone to work on your HVAC system unless they are licensed and bonded. This industry is one where mistakes happen often and you want to make sure that you are protected. You do not want to be stuck paying for medical bills that are more expensive than the work you were having done.
When buying an air conditioner, you want to find out with a SEER rating of 13 or higher. 13 is the minimum standard set by the government, so higher ratings, while not mandatory, are going to offer you better efficiency. SEER ratings can go as high as 19, so keep this in mind as you shop.
When deciding what size of an air conditioner is right for you, you will need to measure how much area it will have to cool. You can easily calculate this by using the formula: 20 BTUs per square footage of space. If multiple rooms need cooling, just add their total square footage.
Which way does the air come out of the air conditioner? If you have to place it in a corner, get one with moving vents.
A great way to ensure that the HVAC professionals you hire are up to the task is to take steps to verify that they possess proper licensing and certification. Failing to check these very important credentials can cause you to hire someone who is more likely to do more harm than good and charge you a great deal of money along the way.
Consider how long a contractor has been in business before you hire them. The longer they’ve been in your community, the more likely they are to do a good job. Fly by night operations pop up wherever people haven’t heard of them before, and they’re just the firms you want to avoid.
Do not let the heat build up inside your home. Lighting, electronic devices and appliances are all common sources of heat inside the home. To prevent this excessive heat, do not put televisions or lamps close to your a/c’s thermostat. These appliances make the a/c think that the house is hotter than it really is, causing the system to run longer than needed and wasting energy.
It is important that any contractor you hire is familiar with your make and model of HVAC unit. Ask them what brands they work with most frequently and compare it to what you have. If you can’t find a contractor that knows your brand well, instead consider who has the best reputation.
Don’t just hire the first contractor you meet or call. Be sure to compare multiple options before going ahead with one. They should meet all of your requirements, be it offering a great guarantee to being able to come and do the work on your budget and within your timeline.
It wasn’t too hard to learn about HVAC now that you can see that the tips are easy to follow. The key is just taking the time to make things work right. Just don’t give up and you should be able to use the above advice to lead you to success.